1917A1 Ammo box Hardware set

1919A4 bucking bar builders set. Comes with one of each bucking bars for lower rivets, and upper rivets, also has a pack of rivets and a tool to set them with.

Maintenance kit, fits 1919A4. Kit comes with a booster socket, wrench, drive spring tool, and plunger spring tool. 

1919A4, 1917A1, 1919A6, 30 BMG Armorers tool, use this to remove and install the spring in the lock frame for the plunger. This will save time, and make installing the that plunger so much easier, save your thumb, keep from loosing the spring or worse.

New tool for setting the rivets on the upper rear of the 30 BMG guns, Tool simply wedges the rivets in place, clamp it to the top plate, and set the rivets. Made of 1018 Steel.

30 Cal Cleaning Rod Patch Swab Holder

Push button T&E pin. used for the M2 or M3 tripod T&E's. Surplus item

Rivet countersink tool, 60 degree, 5/8" diameter, 3/8" shank. can be used to counterisink the holes for the rivets

1919A4 bucking bar. Solid steel, machined for semi auto island. These are 7.25" long, and cover all the bottom plate rivets. To use..... Fit the fivets flush with the inside of the plate, clamp a C-clamp or c-clamp style vise grip inside on the...

5/32" rivet setting tool. usually used on the cam rivets. can be used for the bottom plate also, makes a little tighter head rivet dome. use with or without a air hammer.

Bucking bar, Rivet set, and 5/32" tool for rivets. comes as a set to get you started. You dont have to use a air hammer for these, hold them by hand or you can use vise grips to hold the tool. If on back order, I am not adding parts to this page...

30 BMG, 1919A4 semi auto Head Space gauge.

1/8" rivet setting tool, for the smaller rivets. 3 1/2" long, for air hammer or manual setting. just hold it or use vise grips to clamp to it and use a hammer.

T&E PIN, NEW

1919A4 BOOSTER SOCKET

CLEANING ROD handle

1919 drive spring tool, A must have tool for 1919 owners

1919 WRENCH

BROKEN SHELL EXTRACTOR L TYPE

Chamber Brush